Features |
Basic technical specifications |
High precision | ±0.75% of reading (liquid) ±1% of reading (gas, steam) |
wide temperature range | High temperature version: up to 450 °C Low temperature version: down to -200 °C |
Simple parameter setting | Frequently used parameter combinations are placed in one module, thereby reducing parameter setting time. |
Display clearly and concisely | It can display flow rate, accumulated flow rate and self-diagnosis information at the same time. |
Analog/pulse dual output | Output flow signal and pulse signal at the same time |
Alarm Output | If an alarm occurs, an alarm signal will be output. |
Status output (flow switch function) | When an alarm occurs, the alarm signal is output by the contact. In addition, when the flow rate is lower than the set value, a signal can be output by the contact. |
Converter is compact | Equipped with BRAIN/HART communication and panel setting buttons Sensors with the same structure can be used to measure liquids, gases and vapors Stainless steel sensor has no moving parts, durable and safe |
Meet NACE standards | Complies with NAMUR 43 standard Maximum length of separate cable is 30m Explosionproof structure: JIS /FM/ATEX/CSA/SAA (explosionproof/intrinsically safe) |
Basic performance indicators |
Fluid to be measured | liquid, gas, steam (avoid multi-phase flow and adhesion) |
Measuring flow range | see general specifications |
Accuracy | ± 0.75% of reading (liquid), ± 1% of reading (gas, steam) |
Repeatability | ± 0.2% of reading |
Calibration | The flowmeter is calibrated with water before leaving the factory. |
Normal working conditions | |
Fluid temperature range: – 40 ~ 260 °C (general type) | -200 ~ 100 °C (low temperature type, optional) – 40 ~ 450 °C (high temperature type, optional) |
Working pressure range | - 0.1Mpa (- 1kg/cm2) ~ flange rating |
Ambient temperature range | - 40 ~ 85 °C (separate sensor, separate converter) -40 ~ 85 °C (integrated type) – 30 ~ 80 °C (integrated type with meter) |
Ambient humidity | 5 ~ 100%RH (at 40 °C) (no condensation) |
Power supply voltage | 10.5 ~ 42V DC (see the relationship between power supply voltage and load resistance diagram) |
Electrical performance | Since pulse output, alarm output and status output use common terminals, these functions cannot be used at the same time. |
Output signal | Dual |